E220

Description

The E220 is a fully assembled SMD component, Engine Management System (EMS) that is built on the extremely powerful STM32processor technology and Epic EFI firmware. This tiny affordable ECU is suitable for boosted or naturally aspirated with 1-4 cylinders applications

The E220 runs on the Tunerstudio, calibrator and epicTUNER tuning software which is easy learn and use for both novice and seasoned tuners. This allows simple and full control of the fuel and spark of your engine without excessive hours of software familiarization.

Package will include; fully assembled ECU in ABS plastic enclosure with onboard maxx9926 VR conditioner, 32 pin JAE connector and terminals.

Overall size:

78 x 54 x 26 mm

Weight:

120 grams

Inputs:

• Hall or variable reluctor crank input
• Mass Airflow Sensor support
• Onboard LSU 4.9 wideband controller
• Onboard knock control
• 20×20 fuel and ignition maps
• Onboard EGT control
• Short and long term fuel trims
• Traction Control
• Throttle position sensor (0-5v)
• Air inlet temperature sensor
• Coolant temperature sensor
• Wideband or Narrowband oxygen sensor
• Flex fuel
• Launch control
• 2x Spare digital inputs
• 2x spare analog input
• 1x canbus input

Outputs:

• Up to 4 Fuel injector channels
• 2 Logic level ignition channels
• 4 aux outputs for; boost, VVT, idle valve, idle valve 2
• 5 volts sensor reference

24 hour epicEFI community support: https://discord.gg/TwVxa2wRZS